Envoy E Series User Guide 20171215-40.docx
Page 50 of 64
Using SaberCopy
When connecting with an
SLS
USB cable, the challenge when using the Envoy E to load a
micro
SD card is that
both
the onboard memory
and
micro
SD card reader show as “volumes”. The best way to distinguish the player
from the
micro
SD card reader is to connect the player first
without
a
micro
SD card loaded.
In the example below, 2 Envoy E players are connected with SLS cables-
without
cards loaded. The onboard
memory of each are volumes
H:
and
I:
and show with a status of
Online
. The
micro
SD card readers appear as
volumes
D:
and
F:
and show with a status of
Removed
.
Once you insert
micro
SD cards in the reader of both players (
D:
and
F:
), they also show as
Online
. See below:
Once you identify the correct “drives” you would choose the audio project folder desired, set it as
“master”, edit the project settings, assign it to the correct drives and begin the copy procedure as outlined
in
Loading the Audio using SaberCopy
.
