Envoy E Series User Guide 20171215-40.docx
Page 38 of 64
FM Radio (Elite and Equip models only)
Using the FM radio
The Elite and Equip models of the E Series provide an FM radio receiver. Details on how to turn the radio on,
navigate station frequency and use the preset station buttons are all described in the diagram below.
To turn the radio off, either change to audio playback mode (a long press on the Language button
) or turn
the player completely off. The player will
remember
the last station accessed the next time the radio is used.
*Unless these buttons have been disabled using the
configuration file
.
*
Each short press will
decrement the frequency by 0.1
MHz. A 2-second press will scan
for the
previous
FM station (the
LED will blink). When the
lowest frequency is reached,
the scan will stop and beep. An
additional 2-second press will
loop and continue to scan from
108.0 MHz.
*
Each short press will increment
the frequency by 0.1 MHz. A 2-
second press will scan for the
next
FM station (the LED will
blink). When the highest
frequency is reached, the scan
will stop and beep. An
additional 2-second press will
loop and continue to scan from
87.0 MHz.
To switch to FM radio mode, press and hold the Radio button until the
player beeps. The LED will turn
yellow
and the last station listened to
will be played. If the player is in Audio Playback when switching
modes, a bookmark will automatically be set so that playback will
resume from that place when returning to Audio Playback.
These five buttons are the programmable “preset” stations. A
short press tunes to the frequency currently stored for the button.
A 2-second press will program the button to the current frequency
and beep. The frequency range is from 87.0 MHz to 108.0 MHz.
Figure 13: Controlling the FM Radio
