Envoy E Series User Guide 20171215-40.docx
Page 33 of 64
10.
Next, click on the “Output Options” tab (
circled in red
). You will get a screen similar to that below.
11.
The first time this screen is displayed after starting the application, these are settings initially shown as
suggested default values.
On most of the project tabs, SaberCopy will suggest values from the last project opened as defaults.
It is always a good idea to verify the settings on each of the tabs to make sure they are what you want any
time you begin a new project.
12.
For the Envoy S players, we just need to make sure that “Target Device” is set to “Standard MP3 Player,
Smartphone, Tablet, USB”.
13.
The “Custom Options” section in the bottom of the screen is addressed in more detail in
Example 2 of the full
SaberCopy document
.
