Satellite:
Select with the +/- buttons the desired satellite and press the OK button to
display a list. Then select from the list of
the satellite and press the OK button.
Transponder:
Follow the instructions in
the previous option.
Position number & Save:
the approved
range is 0-63. „0“ refers to the original
position.
Go to X:
by pressing the OK button, the
list appears, select the correct position
(the recommended or from 1 to 63).
West <Save> East:
Turn the antenna with the < buttonto the
west, with the button > to the east. By pressing the OK button, a window will show
you a question: „Would you like to change this satellite position“. To save your current
location, press the OK button on the YES option. To cancel it, press the OK button on
the NO position.
Recalculation:
By pressing the OK button, a window will show you a question:
„Would you like to change this satellite position“. For recalculation, press the OK but-
ton on the YES option.
3. Limit:
by pressing the OK / List button, the Limit window will appears.
Limit-Setting:
select with the buttons between
- Limitation of
- eastern border
- Western border
Move the cursor to the Limit button. Press the +/- buttons to turn in the east or west.
The antenna will never turn further than your set position.
ENGLISH
ENGLISH
16
17
Installation and Operation
Installation and Operation
With a fixed antenna
From the submenu „antenna connection,“
select „Fixed Antenna“.
1. Satellite:
In this option, all of the selec-
ted satellites are shown in the satellite list.
Select with the +/- buttons the desired
satellite and press the OK button to dis-
play a list. Then select from the list of the
satellite and press the OK button.
2. LNB Frequency, TP, DiSEqC1.0, DiSEqC1.1:
Follow the instructions in the previous step.
3. 22K, 0/12V, Polarization:
Select with the +/- buttons of the respective value
When motor-controlled antenna
From the submenu „antenna connection,“ select „Motor Antenna“ (motorized antenna).
1. LNB- Frequency:
select the desired type of LNB. Unicable (one cable system) or
Universal.
Motor-Typ:
Choose between the options DiSEqC1.2 and USALS. If you select DiSE-
qC1.2, the options are „local length“ and
„local width“ marked as inactive (gray). If
you select USALS, the option „delete all“
is grayed.
2. Delete all:
By pressing the OK / List
button, displayed asking: „Do you want to
delete the selected satellite position by
this set-top box“ to confirm your selec-
tion with „YES“, all the data of the satellite
erased.
Motor Setting:
Press the OK / List but-
ton and set the window that appears the
motor control.
Antenna Setup