Installation and Operation
Troubleshooting
ENGLISH
ENGLISH
30
31
Various settings to integration the set-top box in a home network.
This menu is only active when the correct USB Wi-Fi is plugged. Then you can set and
manage your wireless connection.
If the set-top box integrated into a home network, you can also be load a upgrade via
the LAN connection.
Wenn you connected with the Internet via Wi-Fi Stick or LAN, the following applications
are enabled
Weather Forecast, RSS Reader, YouTube, Picasa, Google Maps
Various games for entertainment: Othello, Tetris
Memory Information:
Displays the information of the inserted storage medium (total size, free space, etc.)
Remove USB device safely:
Before you remove the storage medium, you should enter this option with OK. Then a
window will appear if you want to remove the media really. To prevent damage or loss
of data on storage medium, you confirm OK. Now the USB stick or external hard drive
can be removed.
Network Local Setting
WiFi Manager
Upgrade by Network
Mediaplayer via Internet
Games
Media
Check for problems with the set-top box, the following situations to detect the source
of error.
Problem
Possible causes
What to do
LED on the front panel fail to
light up/is not lit.
No picture or sound.
Bad picture/blocking error
No startup menu on screen after
turning on STB for the first time.
The remote control is not wor-
king.
Poor picture quality or Less
channels in scanning.
You have forgotten your pass-
word.
Check if the main supply cable is
plugged into the power socket.
Adjust the dish. Check the sig-
nal strength indicator in one of
the channels search submenus.
Check the cable connections,
LNB and other equipment con-
nected to LNB & receiver, or
adjust dish. Replace the LNB.
Replace the cable.
Adjust the dish. Connect an at-
tenuator to LNB input. Change
to a larger dish. Change LNB
with lower noise factor. Replace
the LNB.
Switch the TV to the appropriate
AV input.
Change the batteries (both).
Aim the remote control at the
STB. Check that nothing blocks
the front panel. Check if LED
indicator on the front panel is
showing the time, press the po-
wer button to switch off standby
mode.
Change the LNB power to
14V/19V in Antenna setup
menu.
Contact the dealer or Service
Provider. They will help you set
it up again.
Main supply cable is not con-
nected.
Satellite dish is not aiming to
satellite accurately. No signal or
weak signal. The LNB is faulty.
The cable is faulty.
Satellite dish is not aiming to the
satellite accurately. Signal too
strong. Satellite dish is too small.
LNB noise factor too high. The
LNB is faulty.
The system is connected by
SCART cable and the TV is not in
AV/ EXT mode.
Battery exhausted. Remote con-
trol is not aimed correctly STB is
in standby mode.
Low LNB power or signal loss in
cable.