![background image](http://html.mh-extra.com/html/megasat/countryman-gps/countryman-gps_user-manual_1765089030.webp)
08
ENGLISH
4. Startup and operation
4.1 Get ready to use
4.2 Back to HOME position & Turning off
1. When the all cable connections are completed, press POWER to turn the unit on.
2. HOME LED will be solid this means the antenna is ready to go. If the antenna did not
go back to HOME position, HOME LED will continue to flash while antenna comes
back to HOME. When the unit is ready, the default satellite “ASTRA1” or the last selec-
ted satellite will be shown on LCD screen of the controller.
3. Communication LED will be solid when the unit is turned on. (This light means anten-
na unit is communicating with controller correctly.)
4. GPS LED flashes while searching for the current location. When GPS position is confir-
med the LED will become solid.
5. Waiting until both HOME & GPS LED’s are solid is recommended as this will allow the
unit to find the selected satellite faster with more precise alignment accuracy.
6. If the searching operation starts before GPS becomes solid GPS LED will continue to
flash even when the satellite is already locked. In this case, the unit may readjust skew
once its current location is confirmed.
1. After use and before travelling, press HOME to return the unit back to HOME position.
2. To fully turn off the unit, press and hold POWER for 5 seconds when the unit is at
HOME position.
3. If user stays in a location for an extended period or wish to save power, user can leave
the unit up by simply turning off the unit. Signal will still come through to satellite TV
receiver.