15
ENGLISH
7. Troubleshooting
EL Motor STALL
Elevation motor blocked, the antenna can not straighten up.
AZ Motor STALL
Azimuth motor blocked, the antenna can not turn.
SOLUTION: Bitte überprüfen Sie, dass keine Hindernisse die Antenne blockieren.
EL Motor NO POWER
Elevation motor receiving sufficient power.
AZ Motor NO POWER
Azimuth motor receiving sufficient power.
SOLUTION: Please check the connecting of the control cable and/or whether an
adequate power supply for the antenna is present (12 V, 5 A)
SK Motor NO POWER
Skew errors of the Auto Skew unit
SK Count
Skew errors of the Auto Skew unit
SOLUTION: Please contact a technician of your local dealer.
Error messages of the control unit
Emergency operation:
A failure in the antenna, you can change the DIP switch on
the back of the unit, control the Antenane manually.
Note:
The default settings of the DIP switch, see page 10.
up
down
Cycle Test
The antenna simulates
the search.
Manueller Modus (Elevation)
The antenna can be controlled via
the SEARCH and STOW button.
Manueller Modus (Azimuth)
The antenna can be controlled via
the SEARCH and STOW button.
1
1
1
2
2
2
3
3
3
4
4
4
5
5
5
6
6
6
Note:
After an error message, the control unit must be turned off by simultaneously pres-
sing the STOW and SEARCH button. To switch on, press the Power button again.