background image

Contents 

H3C ANT-5029D-M2 dish antenna installation guide ····························································································· 1

 

Technical specifications ···················································································································································· 1

 

Safety precautions ····························································································································································· 3

 

Installation guidelines ······················································································································································· 3

 

Choosing a mounting location ········································································································································ 4

 

Mounting the antenna ······················································································································································ 4

 

Tools and equipment required ································································································································ 4

 

Mounting the antenna on a mast ···························································································································· 5

 

Recommended cable ················································································································································ 6

 

 

Summary of Contents for ANT-5029D-M2








Reviews: