manualshive.com logo in svg

Megapix DWC-MPTZ230XTW, User Manual

Share
Download
Megapix DWC-MPTZ230XTW User Manual Download Page 9

Installation -

Installation - ceiling mount bracket

1.  Using the mounting template or the accessory itself, mark and drill 

the necessary holes in the mounting surface. 

2.  Use the included screws and anchors to secure the ceiling mount to 

the mounting surface.  

3.  Pass wires through the mounting bracket. 
4.  Connect the camera’s base into the ceiling mount’s neck, and 

secure using the screws on the side of the neck. 

5.  Open the camera’s base by rotating the base clockwise to the 

unlock position. Make sure the camera’s safety wire is connected 
between the camera base and the camera module. 

UNLOCK

LOCK

6.  Connect all wires to the camera. Please refer to the camera’s QSG 

for cable management.

7.  Attach the camera’s body to the base by rotating the base counter-

clockwise to the lock position. 

8.  Place and secure the camera dome cover using the screws at the 

base of the dome. 

9.  Remove the protection film when the installation is complete. 

NOTE:

  See the QSG for the mounting accessory for more information. 

8

Summary of Contents for DWC-MPTZ230XTW





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands