manualshive.com logo in svg

Megapix DWC-MPTZ230XTW, User Manual

Share
Download
Megapix DWC-MPTZ230XTW User Manual Download Page 7

6

Installation -

Disassemble the camera

Before installing your camera, you have to read the following cautions.

1. 

The mounting surface must bear five times the weight of your camera. 

2. 

Do not let the cables get caught in improper places or the electric line cover be damaged. This may cause a 
breakdown or fire. 

3. 

 Before the installation, remove the lens protection cap and tape. 

4. 

Install the moisture packet in the base of the camera module. 

a. Remove the moisture absorber from the packaging. 
b. Place the moisture absorber under the camera’s lens module 
as shown in the picture below.

DES

I PA

ESI 

PAK

DES

I P

DD

SI P

AKK

NOTE:

  The camera will generate enough heat to dry moisture during operation. In most cases it will not need 

the moisture absorber for more than the first day. In cases where the camera can experience a moisture issue, 

users must keep the moisture absorber in the camera. The moisture absorber has an approximately 6-month 

life cycle, varying depending on the environment. 

WARNING:

 It is highly recommended that you install the moisture absorber when mounting the camera. The 

moisture absorber prevents moisture from being captured inside the camera's housing, which may 

cause image performance issues and damage the camera. 

5. 

The camera requires a mounting accessory, sold separately, to complete the installation. Using the accessory’s 
mounting template, mark and drill the necessary holes in the mounting surface.

 

Resetting the camera:

 To reset the camera, 

press the reset button in the control board  

at the base of the camera. Pressing the  

button for five (5) seconds will initiate a  

camera-wide reset of all the settings, 

including the network settings.

Summary of Contents for DWC-MPTZ230XTW





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands