H
S
I
L
G
N
E
ENGINE, BRUSHLESS TYPE
It is responsible for transforming electrical energy into mechanical energy.
The operation is always through continuous pedaling, the help obtained depends on the level of support
used. In conjunction with the electronic controller, it is responsible for switching off the engine when the
brake controls are actuated or when the 25 km / hour is reached.
ELECTRONIC CONTROLLER
Electronic device that manages the operation of electronic components. Mainly the engine.
BATTERY
Accumulates the electrical energy and supplies it to the following electronic components.
- Engine
- Electronic controller
- Display
ELECTRONIC SENSOR P.A.S.
The basic function is to transmit to the controller the continuous movement of the cranks for the motor
to start up.
It is called
P.A.S.
(
P
edal
A
ssist
S
ystem).
DISPLAY
Mounted on the left side of the handlebar. View the battery charge and select the help system. A higher
level of help. The useful life of the battery will be less.
CHECKS - ENGINE DOES NOT WORK
Make sure the battery is connected and charged. If the problem persists, check that the brake levers
are in the initial position and are not operating for any reason.
If the engine still does not operate, check that power is supplied to the controller and check that all
external connections are properly connected. If in spite of all these checks the engine still does not
work, contact with the Partner.
CHECKS - THE BATTERY DOES NOT GIVE LOAD SIGNAL AFTER LOADING
Make sure all connections are correct and check that the switch is on. If it still does not work, contact
with the Partner.
ELECTRONIC COMPONENTS DESCRIPTION
20