MEGAFLO Commercial 1000, Product Manual

Page: 4 / 40

Unvented Hot Water Cylinder
4
Unvented Hot Water Cylinder
4
PRODUCT SPECIFICA
TION (1)
Checklist
Before commencing installation check that all the components for your Megaflo Commercial unit
are contained in the package. The following components are supplied as standard with your Megaflo
Commercial unit:
• Table 1: Cold Water Inlet Control Kit (as below, depending on model)
Commercial Cylinder
Volume (ltr)
Pressure Reducing Valve Pressure Relief Valve S i n g l e
Check Valve
400 - 500 1” Integrated inlet control valve
800 1.25” (1.5 - 6 bar) or (5 -10 bar) 1” x 1.25” (8 bar) or (13 bar) 1.25”
1000
1.25” (1.5 - 6 bar) or (5 -10 bar) 1” x 1.25” (8 bar) or (13 bar)
1.25”
1250 - 1450 1.5” (1.5 - 6 bar) or (5 -10 bar) 1” x 1.25” (8 bar) or (13 bar) 1.5”
2000 - 2500
2” (1.5 - 6 bar) or (5 -10 bar) 1.25” x 1.5” (8 bar) or (13 bar)
2”
• Table 2: Expansion Vessel (as below)
Commercial Cylinder
Volume (ltr)
Expansion Vessel
Size (ltr)
Mounting Kit Weights
400 - 500 60 Floor Mounted 12kg
800 100 Floor Mounted 17kg
1000 - 1250 150 Floor Mounted 24kg
1450 200 Floor Mouinted 38.5kg
2000 - 2500 300 Floor Mounted 41kg
• Factory fitted Temperature & Pressure Relief Valve, set at 90ºC / 1 MPa (10bar) or factory fitted
Temperature & Pressure Relief valve set at 90ºC / 1.5MPa (15bar) Depending on model.
Connection size 1 1/4”BSP male to cylinder and 1 1/4” BSP female outlet.
• Tundish 1 1/4” inlet, 1 1/2” outlet.
• Thermostat and Thermal cut-out
• Isolating Valve (1”, 1.25”, 1.5” or 2”) depending on model.
• 1” Drain Valve.
• 2-Port Motorised Valve, 1 1/4” or 1 1/2” depending on the model.
• All connections BSP female.
Notes:
1” Integrated inlet control valve is not assembled.