MEGAFLO Commercial 1000, Product Manual

Page: 3 / 40

Unvented Hot Water Cylinder
3
PRODUCT SPECIFICA
TION (1)
Product specification
Introduction
Congratulations on your purchase of a Megaflo Commercial unvented water heater. The Megaflo
Commercial products are manufactured in the UK from top quality materials and meets all the
latest relevant safety and constructional standards. The high grade Duplex stainless steel cylinder
offers exceptional strength and corrosion resistance which is backed by a 30 year warranty* Its
performance and insulation levels exceed the latest requirements of Building Regulation Part L.
The Megaflo
Commercial unvented water heater can be fed directly from the cold water mains
supply to the property without the need for separate feed cisterns or vent pipes. It is supplied
complete with all its necessary inlet and safety controls.
The Megaflo
Commercial cylinder range all require a separate expansion vessel to accommodate
any expanded water.
General Requirements
IMPORTANT: Please read and understand this product guide before installing the Megaflo Commercial
water heater. Incorrect installation may invalidate the warranty * .
The Megaflo Commercial must be Installed, Commissioned and Maintained by a competent installer
in accordance with Building Regulation G3 (England and Wales), Technical Standard P3 (Scotland)
or Building Regulation P5 (Northern Ireland) and the Water Fitting Regulations (England and Wales)
or Water Byelaws (Scotland).
THIS APPLIANCE CAN BE USED BY CHILDREN AGED FROM 8 YEARS AND ABOVE AND
PERSONS WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES OR LACK OF
EXPERIENCE AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION
CONCERNING USE OF THE APPLIANCE IN A SAFE WAY AND UNDERSTAND THE HAZARDS
INVOLVED. CHILDREN SHALL NOT PLAY WITH THE APPLIANCE. CLEANING AND USER
MAINTENANCE SHALL NOT BE MADE BY CHILDREN WITHOUT SUPERVISION
WARNING: Do not switch on if there is a possibility that the water in the heater is frozen.
THE BENCHMARK
tm
SCHEME
Benchmark
tm
places responsibilities on both manufacturers and installers. The purpose is to ensure that
customers are provided with the correct equipment for their needs, that it is installed, commissioned
and serviced in accordance with the manufacturer’s instructions by competent persons and that it
meets the requirements of the appropriate Building Regulations. The Benchmark
tm
Checklist can be
used to demonstrate compliance with Building Regulations and should be provided to the customer
for future reference.
Installers are required to carry out installation, commissioning and servicing work in accordance with
the Benchmark
tm
Code of Practice which is available from the Heating and Hotwater Industry Council
who manage and promote the Scheme. Visit www.centralheating.co.uk for more information.
* See Terms and Conditions of warranty
Note: This Megaflo commercial cylinder needs a minimum 100L/min water supply at open outlet.