14
It’s recommended that the Cabinet Cooler is installed in the top of the enclosure.
However, if space is an issue the Cabinet Cooler can be installed in any position, even
upside down, with no loss of performance.
B. Remove bulk head nut & washer from the bottom of the
Cabinet Cooler
C. Fit desired generator
As standard the Cabinet Cooler is supplied with a red (Refrig) 15cfm, 293W (1000
Btu/hr) generator. To change the generator simply unscrew the bulk head fitting and
replace the generator with another colour. Please remember to re-fit the o-ring and
screw bulk head fitting until tight.
Four generators are provided with the Meech Cabinet Cooler. Information on all
generators and sizing can be found in section 7.
