EN
110
left-handed, you must have your left hand on the front hand-grip and the right hand on the rear
hand grip
Cold start
1
Put the switch to the ”I” position
2
Push the fuel pump until you see that fuel is coming through
3
Pull out the choke knob The choke will close and the throttle lever will then be set in
the starting position
4
Push the front handle guard/chain brake downwards and towards the front to activate
the chain brake
5
While holding the saw securely on the ground, pull the starter handle vigorously
6
When the engine fires, press the throttle to reset the choke and pull the starter handle again
to start the engine
1 Chain oil
2 Fuel
3 Engine switch
4 Fuel pump
5 Choke knob
2
1
3
4
5
