Meec tools 740-057, Operating Instructions Manual

Page: 44 / 48

ENGLISH
44
12. Power
switch
13. Safety switch for low oil level
14. Fuel tank
15. Oil fill plug
16. Oil drain plug
OPERATION
Use
IMPORTANT:
Always fill up with fuel and engine oil before using for the first time.

Check the fuel level, and top up if necessary.

Make sure there is adequate ventilation.

Check that the spark plug lead is connected to the spark plug.

Inspect the area where the machine is going to be used.

Disconnect all electrical equipment from the machine.
Starting the engine

Do not connect any electrical equpment to the machine before starting the engine.

Open the fuel cock (10) by turning it down.

Put the power switch (12) in the O position.

Put the choke lever (8) in the IØI position.

Pull the starter cord (9) briskly to start the engine. Pull again if the engine does not start.

Move the choke lever (8) back when the engine has started.
14
13
12
15
16