Meec tools 721-110, Operating Instructions Manual

Page: 85 / 98

ENGLISH
85
1. Mount for the ejector unit’s control handle
2. Washers, nylon lock nut, nut

Insert the mount through the hole in the left-hand part of the upper handle.

Slide the washer onto the handle mount.

Install and tighten the nylon lock nut.
1. Pin

Remove the pin from the upper end of the handle mount.

Insert the handle mount through the hole in the coupling.

Replace the pin.
Ejector unit
1. Seat for ejector unit
2. Ejector unit

Remove the screw and the flat washer from the ejector unit.