ENGLISH
83
WARNING!
Keep your hands and feet away from moving parts. Do not use starting fluid.
The vapours are highly flammable.
1.
Clean the area around the filler cap before opening the fuel cap.
2.
The fuel tank has a level indicator. Fill up to the red plate in the screen. Do not overfill.
1.
Fuel level indicator, view from above
Oil level inspection
IMPORTANT!
The engine is supplied without oil. Fill with 1,0 l oil and check the oil level
prior to starting the engine. Do not run the engine with insufficient oil – risk of serious
engine damage. The warranty does not cover damage resulting from the engine being run
with too little oil.
NOTE!
Check the engine’s oil level on a flat surface with the engine turned off.
1.
Remove the oil filler cap with the dipstick
and wipe the dipstick.
2.
Refit the filler cap with the dipstick without
tightening.
3.
Remove the oil filler cap with the dipstick
again. Top up the oil if the level is too low.
The correct viscosity and oil volume are set
out in the engine maintenance section.
NOTE!
Do not overfill. This can cause the engine
to smoke, be difficult to start or cause soot on the
spark plug.
4.
Refit the filler cap with the dipstick and
tighten before starting the engine.
NOTE!
Fill so that the level is between the
minimum and the maximum marks.
INSTALLATION
NOTE!
The right and left sides of the machine are specified as viewed from the driving position behind
the machine.
Unpacking
1.
Remove the plastic covering parts of the machine.
2.
Unpack all loose parts.
Summary of Contents for 721-110
