EN
52
Bevelling
WARNING:
Before bevel cuts can be made, the additional fence must be mounted in the new
equivalent position.
1.
Fit the extra fence in the new equivalent position.
2.
Adjust the blade if necessary. Undo the screw (2) and set the indicator to the required
number of degrees. Retighten the screw. Test saw and measure with protractor. Repeat until
the angle is exact.
3.
Move the saw head to its rear end position on the saw head guide and lock it with the locking
screw (1).
4.
Release the arm for the bevel angle setting (located at the rear of the saw).
5.
Move the arm slowly to the required bevel angle.
6.
Tighten the arm for the bevel arm setting.
