EN
49
Unlocking the saw head
1.
Press the saw head slightly downward.
2.
Pull out the transport lock.
3.
Move the saw head upwards.
NOTE:
Never start the tool if the saw head is locked
Connection of the dust bag
1.
Open the metal clip.
2.
Guide on the dust bag on the inlet sleeve and close the metal clip.
REPLACING THE SAW BLADE
NOTE:
Use only saw blades recommended by the manufacturer and that are approved for speeds in
excess of
4000 r/min. Always remove the plug from the power outlet before starting to replace the blade.
Dismantling the saw blade
1.
Unplug the tool from the power outlet.
2.
Move the saw head upwards.
3.
Release the blade guard and move it upward.
4.
Pre-position the spindle lock by pressing the spindle lock button and at the same time turn
the saw blade slowly by hand until the spindle lock engages.
5.
Secure the wrench on the blade centre screw (A).
6.
Press in the spindle lock button (6) under the handle and turn the wrench so that the lock engages.
7.
Loosen the blade centre screw with the wrench (left hand thread, loosened clockwise).
