EN
19
• Avoid inhaling welding fumes/gas, use
exhaust extraction and ensure good
ventilation of the workplace.
• Welding sparks can cause fires or
explosions.
• Keep flammable material at a safe distance
from the work area.
• Do not carry out welding on containers that
have contained flammable material.
• UV radiation from arcs can cause burn
injuries.
• Use welding goggles, ear protection and
protective clothing. Make sure that the
workplace is well shielded in order to not
expose onlookers or passers-by to UV
radiation and welding spatter.
• Avoid using the product in damp conditions
or rain.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
Warning: Risk of electric shock.
TECHNICAL DATA
MMA
TIG
MIG
Voltage (VAC)
230
230
230
Phases
1
1
1
Frequency (Hz)
50Hz
50Hz
50Hz
Working
temperature
40°C
40°C
40°C
SAFETY INSTRUCTIONS
Read all warnings, safety instructions and
other instructions carefully before use. Failure
to follow all the instructions and safety
instructions can result in the risk of electric
shock, fire and/or serious personal injury.
• Electrical installation must only be carried
out by an authorised electrician – risk of
personal injury and/or death as a result of
electric shock. Never touch live parts. The
product must only be connected to an
earthed power point.
• Leave enough free space around the
product to ensure the circulation of cool air
through the ventilation openings on the
front and back. Keep the area around the
product free from sand, soil, dust and other
debris that can be sucked in through the
ventilation openings. Failure to follow these
instructions can result in overheating and
damage to the product.
• Avoid grinding so that particles are directed
towards the product. Metal particles are
conductive and can result in malfunctioning
and damage if they penetrate the product.
• Do not stack the product.
• Never underestimate the weight of
equipment to be handled, loaded or
unloaded, or go or stand under a
suspended load, or lift or load over persons
or animals Dropped equipment can cause
personal injury. Never lift the product with
the gas cylinder installed.
• Place the product on a smooth, level and
stable surface.
• Never touch live parts or welding
electrodes, especially not with wet hands or
parts of the body, or with wet clothes.
• Always make sure that no part of the body
is earthed – risk of electric shock if your
body is earthed.
• Always wear dry, insulated gloves.
• Vapour and gas produced during welding
can be dangerous or harmful to health.
Summary of Contents for 016793
Page 3: ...1 31 32 ...
