manualshive.com logo in svg

Medtronic Guardian RT MMT-7900, User Manual

Share
Download
Medtronic Guardian RT MMT-7900 User Manual Download Page 51

Getting Started

45 

Affixing the Transmitter

1.

Find a comfortable, protected area on the abdomen (away from the belt-line) that is within Cable 
reach of the Sensor. Clean the area with isopropyl alcohol and allow to dry.

2.

Use the disposable Transmitter adhesive pad (MMT-7006) to affix the Transmitter to your body.

3.

Take off the paper backing from the Transmitter side of the adhesive pad (side labeled “1”).

4.

Stick the adhesive pad to the smooth, flat, unlabeled side of the Transmitter. 

5.

Take off the paper from the skin side of the adhesive pad (side labeled “2”). Press firmly to prepped 
skin. 

6.

Transmitter should now be affixed to skin with serial number facing outward.

NOTE - 

An adhesive remover, such as Detachol

®

, can be used to take off the adhesive pad, or any 

adhesive residue left on the skin after taking off the pad. Use a product tested for use on skin, 

and follow the product’s instructions.

CAUTION: Do not connect Sensor to Transmitter at this time. Do a 
SEARCH for the Transmitter first.

Summary of Contents for Guardian RT MMT-7900

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands