9
Features
SCADA outputs offering machine operation
parameters reside within the digital controller.
Please contact Medora Corp. if you are
interested in receiving these parameters.
Motor Controller
- The motor controller is
located near the motor just below the top plate
of the SolarBee. The motor controller is sealed
in line with the electrical cord that runs to the
brushless motor.
The motor controller on the SolarBee receives
power and signals from the main control center
located inside the external enlosure. These
signals are used to operate the brushless
motor at the commanded speed. The motor
controller also sends feedback signals back up
to the main control center.
Due to the high frequency of communication
between the motor controller and brushless
motor, the two components need to be located
close to one another. This is the primary
reason for having the motor controller located
directly on the SolarBee.
All electronic connections on the SolarBee
equipment should only be used for the inputs
or outputs that they are labeled and designed
for. If any of the leads going into the electronic
controller are disconnected, be sure when re-
connecting to place them in the proper position.
Wiring -
All electric wiring includes corrosion-
resistant, industrial cords with molded, weather
and watertight connectors. The connectors are
indexed to prevent improper wiring. A general
electrical schematic can be found in the
Maintenance and Field Adjustment section.
SCADA Signal From SolarBee Unit
Durable Wiring And Connectors
