MEDIZS Smart DR13, Operation Manual

Page: 12 / 98

11
2. A sudden heating of the room in cold areas will cause condensation
on the protective glass in the monitor screen and on optical parts
inside the instrument. In this case, just wait until condensation
disappears before performing measurement.
3. This instrument is used with accessories from MEDIZS. If consumer
would like to use the accessories from other manufactures, safety of
accessories should be verified and identified by manufacturer or by
MEDIZS.
4. Operation manual should be keep at the place where the user can
easily access.
5. This instrument can be installed and maintained by the person who
have completed training or education course.
6. When moving this instrument, please keep vibration or impact away
from the equipment. It can bring some damage inside or outside of
the instrument. Please carefully handle the instrument.
7. When moving equipment, fixes the stage, always keep power off, and
then lift the bottom of the unit with both hands.
8. To connect this instrument with other relevant equipment, consult with
the dealer about the way to make it.
9. In case there is smoke, strange odor or noise on working, disconnect
the power supply and consult the dealer.
10. Don't use organic solution such as alcohol, thinner, benzene, etc. to
clean the surface of this instrument. It may damage the instrument.
11. Do not disassemble or modify this instrument.
12. If you are not using this instrument a long time, disconnect the power
supply and protect the unit with dust cover.
13. Do not pull on the cable of equipment.
14. Please check the condition of unit appearance before using the
instrument.