Safety
Connecting
Operation
Help
Appendix
- 15 -
LAN Connection
Diagram reference:
P
Your PC is equipped with a network connection, in order to prepare it for network
operation.
The network cable usually has two
RJ45
plugs so it is not important which plug is
connected to which port.
1. Connect one side of the cable to the PC port.
2. Connect the second side to the other PC or hub/switch.
For further information refer to chapter “
Network
” starting at page 35.
Connecting the Wireless LAN Aerial
Diagram reference:
F
The components (mini-PC Module) will already be integrated and activated in your
PC if your PC is equipped with this functionality. You will only have to screw on the
aerial optionally supplied to the wireless LAN aerial input. Please read the safety
note and the conditions from page 35 under all circumstances.
Modem Connection
Diagram reference:
E
Connect the modem cable as follows, if your PC is equipped with an analog modem
card:
1. The
RJ11
cable is plugged into the modem of your PC.
2. The
TAE
cable fits an N-coded, analog telephone port.
Attention!
Please observe that the modem may only be connected to an
analog
telephone line. The connection of a digital system (ISDN, etc.) to an
analog telephone line can possibly cause damage to the modem or
the connected devices and the telecommunication network.
