Safety
Connecting
Operation
Help
Appendix
- 11 -
Connecting the Monitor
Diagram reference:
J, K
Your PC is equipped with a
VGA
and a
HDMI
connector.
Note
Always connect only one data cable in order to avoid problems with
the signal allocation, if your monitor has several inputs (for example,
VGA and HDMI).
Note
Ensure that the connector and the port fit exactly to avoid damaging
the contacts. Because of its asymmetric form, the plug only fits into
the port in one position.
1. Connect the data cable of the monitor to the port on the graphics card (refer-
ence
J, K
). If necessary, remove the white guard ring on the monitor plug
and ensure that the plug and port join together precisely.
2. Hand-tighten the screws on the monitor cable.
Caution!
Your PC monitor is preconfigured for a screen resolution of
1024 x
768
pixels and an optimal refresh rate of
60 hz
. If your monitor does
not support these settings, it may become damaged or malfunction
during use. You can change the screen resolution and configuration
of your monitor as follows (also refer to your monitor's user manual).
You will change the screen resolution in the
Control Panel
under
Personalize
appearance and sounds
.
The Program can be started in the following way:
•
Right mouse click on the Windows interface (Desktop) and left mouse click
on
Personalization
.
or
•
Through
Start
Ö
Control Panel
Ö
Personalize appearance and sounds,
double click using the left mouse button.
