MD 4302 BDA/UK 19.09.2002 13:54 Uhr Seite 8
C
M
Y
CM
MY
CY
CMY
K
Once in the lap stopwatch mode, press
the set button to start measurement of
the lap time.
The maximum lap time is 99 minutes and 59 seconds.
The time displayed then begins at
00:00 again.
Keep the set button pressed for longer
than 2 seconds to delete the lap time
memory
.
- 12 -
The overall lap time and the total number of laps will now be displayed at 2 second intervals
with the average time for all laps as well as the respective average heart rate from the lap
time memory
.
The monitor must be in the lap stopwatch
mode for the lap memory to be
requested, i.e. the lap number and the
lap time are visible in the top right-hand
corner of the display
, under this the
current heart rate and the letters "LAP".
If this is not the case, enter the time
mode and press the mode button to enter
the training stopwatch mode and then
the option button to reach the lap time
mode.
If you press the mode button the time
measurement will be stopped without
continuing automatically with the next
lap.
Press the set button again to end the
time measurement for the current lap.
The stopwatch automatically begins time
measurement for the next lap.
Press the set button to start measurement
of the time for the current lap.
Press the set button to start the time
measurement for the next lap or press
the option button to leave the lap time
mode again.
The monitor must be in the lap time
stopwatch mode for the lap timer to be
set, i.e. the lap number and the lap time
are indicated in the top right hand corner
of the display
, under it the current heart
rate and the letters "LAP".
If this is not the case, enter the time
mode and press the mode button to enter
the training stopwatch mode and then
the option button to reach the lap
stopwatch mode.
Once in the lap time mode keep the
mode button pressed for approx. 2
seconds to start the lap time memory
.
Press the set button to indicate the
average heart rate and the time stopped
for every lap. Change between the
individual lap by pressing the set button.
Press the mode button to leave the lap time
memory and return to the lap time mode.
LAP
TIME ST
OPW
A
TCH MODE
Y
our heart rate monitor has a lap time stopwatch for up to 16 training laps.
Keep the set button pressed for more than 2 seconds to return the lap time mode to
its original state.
LAP
TIME MEMOR
Y
After training, you have the possibility of reading of
f the training values for the total
time for all laps and the total number of laps with the average time for all laps as well
as the respective average heart rate from the lap time memory
. In addition you can
request the times of the individual laps with the respective average heart rate.
- 13 -
