MD 4302 BDA/UK 19.09.2002 13:54 Uhr Seite 3
C
M
Y
CM
MY
CY
CMY
K
The bell symbol remains visible in all operating modes if the alarm has been switched on.
- 2 -
The monitor must be in the time mode
for the time to be set, i.e. the time is
shown in the top right-hand corner and
the current heart rate in the bottom right-
hand corner of the display
. If this is not
the case, press the option button until
you are in the correct operating mode.
Then press the mode button to reach the
time mode.
Confirm your selection using the mode
button, the clock will then appear with
the hour figure flashing. Set the current
hour using the set button.
Or for 12-hour setting:
Press the mode button.
The minute figure
will begin to flash. Use the set button to
set the minutes correctly
.
Return to the time mode by pressing the
mode button.
When 12-hour display is selected, the
American calendar format month/date will be displayed
automatically
. When the 24-hour display is selected the European calendar format date/month
is displayed. When setting the 12-hour clock make sure the display for
AM (before noon)
and PM (after noon) is correct.
- 3-
The monitor must be in alarm time mode
for the alarm time to be set, i.e. the alarm
time, the current heart rate and the letters
"AL" can be seen on the display
. If this
is not the case, enter the time mode and
press the option button to move into the
alarm time mode.
Confirm your selection using the mode
button, the alarm clock will then appear
with the hour figure flashing. Set the hour
required by pressing the set button.
Press the mode button.
The minute figure
will begin to flash. Now use the set button
to set the minutes.
Return to the alarm time mode by
pressing the mode button.
Once in the time mode, keep the set
button pressed for approx. 2 seconds
until the word "Hold" disappears from the
display
. Now press the set button to select
between 12-hour and 24-hour display
.
Once in the time mode, keep the set
button pressed for approx. 2 seconds
until the word "Hold" disappears from the
display
. Now press the set button to switch
the alarm on (the word "on" and a bell
symbol appear in the display) or of
f (the
word "of
f" appears in the display).
SETTING THE TIME
SETTING THE
ALARM TIME
