EN
19
5.4. Connecting the antenna
Your smart TV processes different antenna signals.
You can input the following image signals to the television through the socket labelled
ANT.
10
:
• Via analogue cable/an analogue house aerial
• Via a DVB-T2/ DVB-T
1
antenna or
• Via a DVB-C
1
connection (digital cable connection)
Insert the antenna cable either from the house aerial/analogue cable connection, a DVB-T anten-
na or the DVB-C connection in the antenna socket on the Smart TV.
To receive encrypted/subscription channels you will need to use a CI module (Conditional
Access Module) and an appropriate card. Insert a CI module (available in specialist shops)
in the slot provided for this purpose on the left-hand side of the device (
COMMON IN
TERFACE
). You can then insert your provider’s card in the CI module.
5.5. Connecting the power supply
Connect the mains plug on the device to an easily accessible 220 to 240 V ~ 50 Hz mains socket.
The socket must always be easily accessible.
5.6. Switching the smart TV on and off
The device will be in standby mode as soon as you have connected the mains plug to the mains
socket.
Switch the device to standby mode using the standby/on button on the remote control or by
pressing and holding
MODE
on the multifunction switch. The device continues to use power
even when switched off (see also the relevant power consumption in standby mode in the “Pro-
duct data sheet” section on page 68).
To switch the device on from standby mode, press
– on the remote control: the standby/on button, one of the number buttons or one of the
P
/
buttons;
– on the device:
MODE
. multifunction switch
Use the Standby/On button on the remote control to switch the device back into standby mode.
The device will be switched off, but will continue to use power. The device will continue to con-
sume power as long as it is connected to the mains network (see the relevant power consump-
tion when switched off in the “Product data sheet” section on page 68).
If the device is not receiving an input signal, it will automatically switch to standby mode
after three minutes. A countdown timer will be displayed on the screen until this time. This
function is not available for all sources.
1
This service must be available in your region.
31373 EN Aldi UK Content 30027461 RC.indd 19
31373 EN Aldi UK Content 30027461 RC.indd 19
23.07.2019 14:42:08
23.07.2019 14:42:08
