Medion F2 Revision 22, Operating Instructions Manual

Page: 38 / 70

16 of 48
5.9. Connecting the audio output / headphones /
speaker boxes
Connect active speaker boxes for playback or an audio connection cable for
recording. Read the operating instructions for your stereo to find out which input
you need to use (usually Line In or Aux).

Connect the cable to the green socket on the back of your PC with the 3.5mm
stereo jack.
5.9.1. Connecting the headphones
Connect the headphones/earphones here.

Connect the cable to the green socket on the front of your PC with the 3.5mm
stereo jack.
WARNING!
Damage to hearing!
Excessive volumes when using headphones or
earphones, as well as changes to the default settings on
the equaliser, driver, software or operating system, can
generate excessive acoustic pressure that can cause
hearing loss.

Before pressing play, set the volume to the lowest
setting.

Start playback and increase the volume to a
comfortable level.
5.9.2. PCs with surround sound system ( Surround) (optional)
Connect the surround sound system as follows:

Connect the cable of the front speaker into the green socket marked FS .

Connect the boxes for emitting sound to the back of the room to the RS socket.

Connect a central speaker or subwoofer to the CS socket.

Connect other speakers for emitting sound to the rear of the room to the SS
socket.
A digital audio output (SPDIF) (optional) can be connected with an optical or coaxial
cable.

Connect an optical cable to the optical socket or a coaxial cable to the coaxial
socket.

Connect the other end of the cable to an audio device that has a corresponding
digital input.