Medion F2 Revision 22, Operating Instructions Manual

Page: 34 / 70

12 of 48
• Ensure that all connection cables are connected to their corresponding
peripheral device to avoid any interference radiation. Disconnect any cables that
are not required.
5.2. Opening and closing the front cover (optional)
Some connections are behind the front cover. This is very useful because you can
quickly and conveniently make frequently used connections without turning
around the PC. The closable cover also protects the connections.
5.3. Connecting the monitor (optional)
Your PC has a VGA , DVI connection and/or a DisplayPort .
PLEASE NOTE!
If your monitor has several inputs, only ever connect
one data cable to avoid problems with signal allocation.

Ensure that the plug and the socket fit together
precisely in order to avoid any damage to the
contacts. Due to its asymmetrical shape, the plug will
only fit into the socket in one position.

Connect the screen data cable with the graphics system socket. Remove the
white protective ring (if present) on the monitor plug.

When connecting a VGA or DVI device to the monitor cable, screw the screws in
hand-tight.
5.4. Connecting an HDMI device (optional)
HDMI stands for “High Definition Multimedia Interface”, which is an interface for
fully digital transfer of audio and video data.

You can connect a television set, monitor or projector to this socket if these
output devices have the corresponding connection.
5.5. Touchscreen (optional)
Your PC comes with a touch-sensitive screen. To get the most out of it, it is
important that you follow the advice below:
5.5.1. Operation
• To avoid damaging the screen do not touch it with pointed or
sharp objects.
• Only use a blunt stylus or your finger.