Medion Erazer X6811, User Manual

Page: 25 / 108

Getting Started
18
Getting Started
Before you get started using your notebook, first take a few moments to read the
important section on
Safety . This notebook comes with software fully pre-installed . You
do not have to install any of the discs supplied.
How to start:
Step 1

Insert the battery before bringing the notebook into operation by sliding the battery
pack into the compartment. Lock the battery under all circumstances, in order to
avoid it falling out unintentionally.

Connect the supplied power adapter to the notebook at the notebook power
socket (
21 ). Connect the power adapter via a power cable to a free AC power
outlet.

Open the display to the required position with your thumb and index fingers. To
avoid damage to the TFT Display, never open it more than 120º. Do not forcibly
open it.
Note
Please ensure that the battery is inserted and the power adapter connected
when operating the Notebook for the first time. If you fail to do this,
Windows® 7 will not be able to calculate the performance index correctly.

Switch the notebook on by operating the On/Off Switch ( 3 ). The notebook starts
and now goes through a number of phases.