42
USB Port
Diagram reference:
E1, E2
(optional feature)
NOTICE
!
Devices connected directly to the USB bus should not draw more
than 500 mA. The voltage output is protected by a fuse (Limited
Power Source according to EN 60950). Should the devices need
more power than this, it will be necessary to provide a hub (dis-
tributor / booster).
On the USB it is possible to connect up to 127 devices which correspond to the USB stan-
dard (1.1 and 2.0 supported).
The USB 3.0 connection sockets are completely compatible to USB 2.0 and 1.1.
NOTICE
!
If possible, always connect your USB devices to the same port
where it has been installed. Otherwise you will get a new ID and
your operating system will ask for a new installation of the driver.
