Medion AKOYA P5310 D Instruction Manual Download

Page: 84 / 100

English

FAQ – Frequently Asked Questions

Do I still have to install the enclosed discs?

No. Basically all programs are already preinstalled. The discs are only
intended as backup copies.

Where can I find the drivers necessary for my PC?

The drivers are on the second partition of the hard drive, in the Drivers
and Tools directories.

What is the Windows activation?

Your operating instructions include a chapter about this subject.

When do I have to activate Windows?

Your software has been preactivated in the factory. An activation will
only be required, if ...

... several components are replaced by others.

... you installed a new motherboard.

... a different BIOS version has been installed.

... you install the software on to another computer.

When is the recovery of the factory setting recommended?

This method should be chosen as the last resort. Read chapter “

Sys-

tem

Restore

” concerning the possible alternatives.

Summary of Contents for AKOYA P5310 D





































































































Search results

Summary of Contents for AKOYA P5310 D

Reviews:

Related manuals for AKOYA P5310 D

Brands by name

Popular brands

Medion AKOYA P5310 D, Instruction Manual

Search results

Summary of Contents for AKOYA P5310 D

Reviews:

Related manuals for AKOYA P5310 D

Brands by name

Popular brands