Medion AKOYA P5310 D, Instruction Manual

Page: 24 / 100

English
14
Connecting IEEE 1394 (Fire Wire) Devices
Diagram reference: I
Warning!
Connect your IEEE 1394 devices after initial set-up of your new PC. This
will prevent unnecessary confusion during installation. These devices can
generally be connected during operation. Read the manual for your periph-
eral device first.

The voltage outputs of your PC for IEEE 1994 are protected by a fuse (limited power
source according to EN60950). This ensures that a malfunction of the PC will not
damage the peripheral devices connected to the respective jacks.
Note
Take care to ensure that the connector and the socket fit exactly to avoid
damaging the contacts. Because of its asymmetric form the plug only fits
into the socket in one position.
1. Connect the IEEE 1394 cable to the IEEE 1394 port of your PC.
LAN Connection
Diagram reference: J
Your PC is equipped with a network connection, in order to prepare it for network opera-
tion.
The network cable usually has two RJ45 plugs so that it is unimportant which plug is con-
nected to which jack.
1. Connect the one plug of the cable to the PC jack.
2. Connect the other plug to the other PC or hub/switch.
For further information refer to chapter “ The Network ” starting at page 47.