Saf
e
ty
Connecting
Operation
Help
Appendix
17
Connecting USB Devices
Diagram reference:
O
Warning!
Connect your USB devices
after initial set-up
of your new PC. This will pre-
vent unnecessary confusion during installation. These devices can generally
be connected during operation. Read the manual for your peripheral device
first.
The voltage outputs of your PC for USB are protected by a fuse (limited power
source according to EN60950). This ensures that a malfunction of the PC will not
damage the peripheral devices connected to the respective jacks.
You have a choice of several connection sockets. It does not matter which you use.
Note
Take care that the connector and the socket fit exactly to avoid damaging
the contacts. Because of its asymmetric form the plug only fits into the
socket in one position.
1.
If you wish to use a
printer, scanner
or other device with a USB port, connect the
cable to the USB socket on your PC.
Note
Connect your devices always to the same port otherwise your operating sys-
tem will give a new ID and asks for driver installation.
Summary of Contents for AKOYA P5310 D
