Medion AKOYA P5310 D, Instruction Manual

Page: 41 / 100

Saf
e
ty
Connecting
Operation
Help
Appendix
31
Connecting the monitor

Ensure that the TFT monitor has not yet been connected to the electricity supply
(mains plug not yet plugged in) and that neither the TFT monitor nor the computer
has been switched on.

Prepare your computer for the TFT monitor if necessary, so that the correct settings
for it will be present.
1 Connect signal cable

Plug the signal cable into the appropriate VGA or DVI connections on the computer
and the TFT monitor.
Note
Always only connect one data cable, in order to avoid problems with the
signal allocation, if your monitor has several inputs (e.g. VGA and DVI)..
2 Connect audio cable

Plug the audio cable into the appropriate audio sockets on the computer and the
TFT monitor.
3 Connect the power supply

Connect the power cable of the power pack to the TFT electricity supply connec-
tion. Now, connect one end of the mains cable to the power pack and connect the
other end to a suitable socket. The mains socket must be in the vicinity of the TFT
monitor and be easily accessible (use the same electricity circuit as for the PC).
4 Power on

The TFT-display can be powered on or off using the power switch on the back. If
the switch is set to
OFF , no power will be consumed. First set the power switch to I ,
next activate the display with the on/standby switch on the front and then power
on your computer.