Medin Miniflow REF 4000, Instructions For Use Manual

Page: 12 / 102

User Manual EN 10
Important instruction: fixation of the inspiratory and expiratory tubes

Ensure that the weight of the tubes does not pull directly on the
patie t’sàheadào ào àtheài te
face. Use cushioning to support
the tubes.

The inspiration and expiration tubing should slope away from
the patient and the Miniflow
® so that the water condensation
does not come into contact with the baby.
(7) Regularly check the CPAP parameters and the fixation.
Important instruction: regular check of the fixation:
Check the fit and fixation of Miniflow ® and the accessories regularly to avoid pressure sores.
Check the prongs and masks regularly for accumulation of secretions to avoid obstruction.
4. Ventilators which can be connected to Miniflow ®
Miniflow ® can be connected to all ventilators that meet the following requirements:

The ventilator has to offer a CPAP or non invasive mode which:
o
Controls the flow and pressure in such a manner that a constant CPAP pressure is maintained in the tubing
system.
o
Is able to work without an external flow sensor.
o
Measures the pressure inside the ventilator or at an external T-connector in the tubing system.
o
Tolerates small leakages in the tubing system.

If used in combination with Medin circuits, the ventilator has to have 22mm male or 15mm female connectors for the
inspiratory and expiratory tubes. If used with other circuits, the size of the connectors to Miniflow
® must be 10 mm
female.
Miniflow
®
can among others be combined with:

Maquet SERVO Serie (i, u und n)

SLE 4000, 5000 und 6000

Hamilton T1, C1, MR1, C2, C3, C6, G5, S1

Newport Medical e360 Ventilator:
For Newport Medical e360, use only Newport approved breathing circuits when you use with the Miniflow
® . Remove the
Miniflow ® device from the circuit when e360 Circuit Check is performed.
4.1 Bonnets, masks, prongs
All bonnets, masks and prongs can only be combined with the Miniflow
®
nCPAP generators.
5. Accessories
Miniflow ® 20 pieces REF 4000
Prongs
–
10 pieces single use
X Small REF 1200-01 Large REF 1200-22
Small REF 1200-21 Large wide REF 1200-33
Medium REF 1200-02 X large REF 1200-03
Medium wide REF 1200-32
Masks
–
10 pieces single use
X Small REF 1200-08 Medium REF 1200-05
Small REF 1200-04 Large REF 1200-06
Masks
–
5 pieces single use
X Large REF 1200-07
Bonnets
–
10 pieces single use