Medifa 5000 User Manual Download Page 7

Page: 7 / 42

User manual for medifa 5000 operating table Version 2.1

2. Foreword

Foreword

Medifa would like to thank you for purchasing the medifa 5000 operating table. With medifa 5000, you have

acquired an operating table that combines design, functionality and comfort in the highest possible “Made in

Germany” quality.

medifa's products are manufactured for a long and trouble-free service life.

Development, design and production at medifa have been certified according to DIN EN ISO 9001 and DIN EN

ISO 13485. The products comply with the requirements of the EU Medical Device Regulations (MDR) and bear

the CE label.

The operating table consists exclusively of high-quality materials with a long service life.

medifa offers a wide range of accessories to meet your requirements. Periodic maintenance by our trained

service technicians also ensures that the table is always in perfect condition during the routine operation.

In case of any questions, please do not hesitate to contact us at any time.

Summary of Contents for 5000











































Search results

Summary of Contents for 5000

Reviews:

Related manuals for 5000

Brands by name

Popular brands

Medifa 5000, User Manual

Search results

Summary of Contents for 5000

Reviews:

Related manuals for 5000

Brands by name

Popular brands