www.mediclinics.com
5
26
ABS
M 04 A / M04AC / M04CS
3 mm (0.12")
220 240 V 50/60 Hz
4,8 A
1.100 W (1,5 Hp)
1,2 Kg (2,65 lb)
IP 23
Class II / Classe ll /
Êëàññ II /
Êáôçãïñíá IÉ
140 W (1/5 Hp) /
Âò
Universal de escobillas / Universal, brush-type / Universel, à balais / Universal, mit Kohlebürsten / Universal com escovas
/ Universale a spazzole
óíèâåðñàëüíûå ùåòêè /
ÃånéêÞò ÷ñÞóçò ìå øÞêôñåò
Axial, PP / Axial, PP / Axiale, PP / Axial, PP / Assiale, PP /
Áîïnéêüò, PP
950 W (1,27Hp) /
Âò
Elec./Sensor - Elec./Sensor - Elec./Capteur Elektr./Sensor. - Elet./Sens. -
Ýëåê./Äàò÷èê /
Çëåêôr./aisèçôÞraò
_
258 mm (10,16")
145 mm (5,71")
138 mm (5,43")
CE / VDE GS / VDE EMC / AENOR / GOST
96 m3/ h. (1.600 l/min)
85 Km / h
54 º C (129,2º F)
Machine must be manipulated only by an autorized technician.
ATTENTION
: Whilst removing the cover, electrical live parts of the appliance are accesible.
Terminal strip location and Ø22 mm cables access hole
Minimum distance shelfs
NOTE: Please plan for a minimum distance of 40 cm (15.75) in relation to possible shelfs, marble surfacesor
washing basins. Avoid as much as possible the presence of reflecting surfaces in the area of actuation of the
appliance IR sensors.
ELECTRIC DIAGRAM
CONNECTION TO ELECTRONIC CARD
Motor
Heating element
Input voltage cables
3-
2-
1-
N
S
L
H
M
3
1
Motor
Heating element
H-
M-
Sensor
S-
1
2
2
WIRING DIAGRAM
220 - 240 V
50/60 Hz
INSTALLATION
Terminal strip
Hole
D > 40 cm ( 15,8" )
N L
ENGLISH
Means for disconnection with contact separations at least 3 mm (0.12) must be incorporated in the fixing wiring.
During the installation process, the protection areas should be considered according to norm VDE 0100.
The hand dryer must only be installed on a closed surface (wall, partition or similar)
