5595.A
2
TEMP 3
FLUID WARMER
Read and understand the Operators Manual before using the TEMP 3
Fluid Warmer.
Intended Use
The TEMP 3
Fluid Warmer is designed to store, rapidly warm, and maintain the
temperature of I.V. and irrigation fluid bags prior to their use.
The TEMP 3
is designed to supply warmed I.V. and irrigation fluid bags for a single
room, (i.e., Operating, LDR, Patient's, etc.). It is not intended to supply warmed I.V.
bags or irrigation solution bags to more than one room at a time.
It is suggested that each facility should contact the fluid manufacturer to obtain the
manufacturer’s specifications for time and temperature for the fluids being
warmed.
Unit Description
The TEMP 3
holds up to (6) 1000ml or (6) 500 ml bags and can be attached to the wall,
a K740 stand, or an anesthesia cart. A temperature controller is used to regulate the
heating of the fluid bags and the over-temperature safety. The top display number (
in
red
) will indicate the temperature of the bag currently being warmed while the bottom
display number (
in green
) displays the desired set-point temperature. During the time
that the controller is directing the unit to warm, a light will illuminate in the upper left
corner of the display.
The Documentor
®
is designed to assist in the compliance with JCAHO
standard MM
2.20 and the I.V. bag manufacturer’s specifications for time and temperature.
Important Labels and Warnings:
Model/Serial Number label
Caution: Replace fuses as marked.
Caution: Electric shock hazard, do not remove protective panel. Refer servicing to Qualified
Personnel.
Caution: Verify temperature of warmed items before use.
Danger: Risk of explosion if used in the presence of flammable anesthetics.
Warning: Unit not intended for blood or blood products.
Caution: Minimum number of bags required for proper operation:
500ml
-
3
1000ml - 2
Caution: Use approved cord only.