3. Installation of the ColumbaTD System
3.2.2. Battery-block Charge
Place the battery-block on the base of the charger provided for this usage. The perforated extremity of the battery-block must be
inserted in the two openings of the base, then fold back it on the base. This mechanism enables to immobilize the Battery-block
using the notch on the charger.
If the mechanism is correctly placed, the red light will turn on to indicate that the charge is in process, the red light will turn off once
the charge is completed. The process lasts approximately two hours
To remove the Battery-block of the base, the fastening mechanism must be release by inserting the unbolting key in the two holes
located on the battery-block. A sound will be heard when unfastening the mechanism. It is preferable to place the key back on its
base after each use, in order to avoid losing it.
Both batteries of the block and the ColumbaTD may slowly unload if they are not use over an extended period of time.
Summary of Contents for ColumbaTD
Page 1: ......
