manualshive.com logo in svg

medemagroup Mini Crosser X1, User Manual, Page: 3 / 64

Share
Download
medemagroup Mini Crosser X1 User Manual Download Page 3

User guide 1533-2001-B

 3 of 64

Version 2.0.0 - 2021

Medema A/S

Content

Intended occupant ................................................................. 5

Help for the visually impaired .............................................. 5

FSN (Field Safety Notice) ...................................................... 5

Symbols.................................................................................. 6

Warning! ................................................................................. 6

Contagion! .............................................................................. 6

Introduction ............................................................................ 7

Control panel ......................................................................... 10

Preparations / Adjustments prior to use ............................. 12

Electric seat adjustment ....................................................... 14

Seat rotation ........................................................................... 15

Steering column .................................................................... 16

Serial number......................................................................... 17

Driving the Mini Crosser X1 ................................................. 18

Lap belt ................................................................................... 21

Specific driving situations

 .................................................... 23

Long hills/difficult ground

 .................................................... 25

Anti-tilt wheels / stabilisers .................................................. 26

General care and maintenance ............................................ 27

Insurance................................................................................ 28

Batteries ................................................................................. 29

Storage/Charging .................................................................. 30

Battery disposal..................................................................... 32

Changing the wheels ............................................................. 33

Fuses ...................................................................................... 38

Brakes..................................................................................... 39

Disengagement ...................................................................... 40

Transporting by motor vehicle ............................................. 41

Securing to vehicle floor with belts

 ..................................... 42

Transporting by plane ........................................................... 45

Towing .................................................................................... 45

Dimensioned drawing, Mini Crosser X1 3W........................ 46

Dimensioned drawing, Mini Crosser X1 4W........................ 47

Introduction to the Ergo2 seat ............................................. 48

Basket in front ....................................................................... 52

Basket on seatback ............................................................... 53

Flame resistance ................................................................... 53

Troubleshooting .................................................................... 54

Programming ......................................................................... 56

Technical data ........................................................................ 57

Summary of Contents for Mini Crosser X1

































































Reviews:

No comments