medemagroup Mini Crosser X1, User Manual, Page: 25 / 64

User guide 1533-2001-B 25 of 64 Version 2.0.0 - 2021
Medema A/S
Across a slope
• Lean into the slope.
• Avoid sudden and sharp movements. This is particularly relevant
when reversing.
• Always drive at low speed.
Long hills/difficult ground
The Mini Crosser is at risk of overheating on very long and
steep hills or on very soft ground, possibly also combined with
high user weight.
To protect the Mini Crosser motor from overheating, there is a
built-in thermos witch, which initially sets the Mini Crosser to
half speed.
However, if you carry on moving over difficult ground, the Mini
Crosser will at some stage stop completely. The Mini Crosser
must be left to cool down for 3-5 minutes before it can start
again.
Important!
Avoid many starts / stops when driving on steep hills. It can
overheat the Mini Crosser.
To reset the fault, switch off the Mini Crosser then turn it on
again.
If the Mini Crosser has not had long enough to cool down when
it is restarted, it will initially only run at half speed.
Note:
The situation described above will never happen in normal use.
It only happens if the conditions are extremely challenging.