medemagroup Mini Crosser X1, User Manual, Page: 48 / 64

User guide 1533-2001-B 48 of 64 Version 2.0.0 - 2021
Medema A/S
Lever for rotating the seat
The lever must be pulled back
to rotate the seat. The seat
can then be rotated to each
side, locking at each 45°.
The lever is spring-loaded, and the seat is locked automatically
when the lever is released. This lever is located on the right side
as standard, but can also be positioned on the left side.
When the lever is located on the left-hand side, it must be
pushed forward in order to rotate the seat instead of pulling
back.
Out / in adjustment of the
lever for rotating the seat
Lift the seat off the vehicle.
Loosen the two Allen screws
and the lever can now be
adjusted out and in to the
desired position.
Placement of lever for rotating
the seat on the left-hand side
Remove the two Allen keys
and pull the lever out.
Insert the lever from the left-
hand side and tighten the
Allen screws.
When installing the lever on
the left-hand side, the lever
must be pushed forward to
rotate the seat..
Introduction to the Ergo2 seat
The Ergo2 seat is designed to stay safe to use for at least 10
years.