medemagroup Mini Crosser X1, User Manual, Page: 32 / 64

User guide 1533-2001-B 32 of 64 Version 2.0.0 - 2021
Medema A/S
Connecting the charger
Connect the plug to the wall socket Connect the charging plug to the 3-pin
socket on the steering column. The
charging socket is located under the
protective cover.
The charger will flash until it is finished. Then the indicator on
the charger will be constantly lit.
Battery disposal
Used batteries must be disposed of through your supplier or at
a recycling centre.
Take care when handling any leaky batteries, as they contain
corrosive acid.
INFO! New batteries can be purchased from Medema A/S.
Note
If the battery is 100% discharged (deep discharge), it is not pos -
sible for the charger to start charging the battery.
There is no warranty on batteries that have been damaged as a
result of deep discharging.
If you are not using the Mini Crosser for a longer period of time,
for example during winter storage, you can choose to discon -
nect the one pole to the fully charged batteries. This way there
will be no consumption of standby power.