background image

User guide P9-0222-B

 30 of 64

Version 1.0.9/2015

Medema A/S

General care

If you get food or drink, etc. on the control unit, you should wipe 

it with a damp cloth.

You must only use a damp cloth to clean the MC Concept. 

Note!

Using a high-pressure cleaner or hose may damage the 

wheelchair’s electronic system.

Service intervals

The MC Concept is designed to require a minimum of maintenance.

However, you are recommended to take it to your dealer for an 

annual inspection.

IMPORTANT! For safety reasons it is of the utmost importance 

that the servicing and safety check intervals are complied with, 

as this minimises the risk of brake failure and short-circuits in 

the wiring, which could generate heat and cause a fire.

(For further information see the Service Manual.)

Insurance

A MC Concept with a maximum speed of 10 km/h is in the eyes 

of the law a bicycle, and no separate insurance is required.

Most contents/home insurance policies include third-party 

liability insurance for cyclists and so also cover MC Concept 

users.

We recommend that you talk to your insurance company about 

this when the vehicle is delivered.

 If necessary, comprehensive insurance will have to be taken 

out separately.

Summary of Contents for MC Concept 1122

































































Reviews: