Questions?
www.medela.ca, [email protected]
or
1-800-435-8316
17
16
Push the breastshield onto
the connector.
Insert the long tubing into
the motor unit.
1
4
7
Wash hands before
touching breastpump, kit
and breasts and avoid
touching the inside of
bottles or lids.
4.1 Assembly of breastpump kit
Screw bottle into connector.
Insert the short tubing into
the back cap as far as it
will go.
Carefully insert the light
yellow membrane into the
base of the connector.
2
5
3
6
Fasten the back cap to the
connector
I Make sure that all 3 snaps
(top & side) are engaged.
4. Preparing for Pumping
Parts you will need for this step:
• tubing
• membranes
• Back
caps
• breastpump
• bottles
and lids
• breastshields
l Wash hands thoroughly with soap and water before touching the breast and
breastpump parts.
l Carry out all the steps with care and assemble the breastpump kit correctly
for optimum performance.
CAUTION
i
l Use Medela original accessories only.
Warning:
Using non-Medela original accessories with your Medela
breastpump represents a health risk.
l Check breastpump kit components for wear or damage before use and
replace if necessary.
l All components must be completely dry before use for proper performance
and to prevent damage to the breastpump.
NOTE
• connectors
INFO
Summary of Contents for Freestyle 27260
Page 1: ...EN 04 47 FR 48 91...