9
Installation – Dead Bolt & Spring Bolt Lock Configurations
1. Locate the tamper proof security seal on your lock assembly case and ensure it is not broken or damaged.
2. Locate the split bushing.
3. Temporarily install the split bushing in the spindle hole on the inside wall of the safe door.
4. Locate the spindle insert and lock assembly.
5. See Figure 2 for proper alignment of spindle insert.
Warning – Security Seal
If the security seal is not affixed to the lock assembly case or if the seal is damaged or broken, you should not
install the lock, but instead contact your dealer.
Medeco XT
Safe Lock Installation Guide
