12
Installation – Swing, Dead & Spring Bolt Lock Configurations
1. Locate the Reader assembly.
2. Remove the outer housing on the Reader assembly and set it aside for later installation.
3. If you are using a swing bolt configuration, you should skip step 4 and continue at step 5.
Warning – Security Seal
If the security seal is not affixed to the lock assembly case or if the seal is damaged or broken, you should not
install the lock, but instead contact your dealer.
Medeco XT
Safe Lock Installation Guide
17. Remove the lock assembly you
temporarily installed in step 7
from the inside of the safe door,
being careful not to lose the
spindle insert.
18. Set aside the lock assembly, spindle
assembly, and spindle insert for
later reinstallation.
19. You have installed the spindle
adaptor and adjusted the spindle
length. Now, you ready to install
the Reader assembly.
